Contact us | China

Tel:+86-18353179896  Email:info@shuochaocnc.com

Shuochao CNCIndustry CNC Equipment Manufacturer

prevnext

SWD series gantry moving beam drilling line

SWD series gantry moving beam drilling line is especially suitable for three-sided drilling of large size H beam steel or box beam.It adopts the method of workpiece fixed gantry moving to process, and has the characteristics of high processing efficiency and stable accuracy.

SWD series gantry moving beam drilling line is especially suitable for three-sided drilling of large size H beam steel or box beam.

 

It adopts the method of workpiece fixed gantry moving to process, and has the characteristics of high processing efficiency and stable accuracy.This type of gantry moving three-dimensional drilling machine can be widely used in construction, bridge, tower and other industries.

Processing technology
Drilling

Drilling     

Application cases
Box Beam

Box Beam

 

 

 

 

Advantage

1.SWD gantry moving beam drilling line is mainly composed of bed, gantry, headstock, electrical control system, hydraulic system, cooling and chip removal system, detection system, etc.

 

2.The beam drilling line adopts the form of gantry movement and fixed worktable, which can reduce the length of the bed and save the floor area.

 

3.Gantry motion (X-axis) is driven by linear roller guide rail, AC servo motor and low backlash gear rack pair. The movement (U, V, W) of the gantry beam and the upper slides on the two columns is guided by linear ball guide rails, driven by AC servo motors and ball screws. The feed movement (axis 1, 2, and 3) of each drilling head is guided by linear ball guides, driven by AC servo motors and ball screws.

 

4.The spindle box adopts the CNC feed drilling power head produced by our company.

 

5.The lower part of the beam drilling line is equipped with a flat chain chip conveyor, and the chip conveyor is equipped with a water pump and a cooling liquid filtration and circulation device.

 

6.The hydraulic system is mainly used for positioning and locking of X-axis and balancing of power heads on both sides.

 

7.It is controlled by numerical control and equipped with upper computer. The workpiece is input and stored by computer, which is easy to operate.

 

8.It can realize the direct conversion of CAD/CAM, thus saving the tedious operation of programming and input.

Technical Parameters
Item Unit SWD2010 SWD3030 SWD4030
H beam(Flange width) mm 300-1000mm 1000-3000mm 1000-3000mm
H beam (Web height) mm 300-2000mm 1000-3000mm 2000-4000mm
Max. Workpiece length m 24000 36000 36000
Drilling diameter mm Φ10-Φ50 Φ10-Φ50 Φ10-Φ50
Spindle CNC Pcs 3 3 3
Electrical systems Siemens Siemens Siemens
No. of CNC axes 8 8 8

(* Other configurations can be selected according to customer requirements)

* Indicates required Purchase:SWD series gantry moving beam drilling line
Full name*
E-mail*
Tel*
Company name*
Message*

Full Name *(required)

E-mail *(required)

Tel

Company name *(required)

Message

During working time,we will contact you within 1-2 hours.
×